Before entering a house or building with mold, it is essential to wear the right personal protective equipment (PPE). This includes goggles or eye protection that can protect against mold damage, an N-95 respirator, a long-sleeve shirt, protective gloves, long pants, and waterproof boots. Goggles or glasses without ventilation holes are recommended by the Environmental Protection Agency (EPA). The Pyramex G704T Chemical Splash glasses are a good option as they have a low profile design and do not interfere with respirators.
When the area affected by mold is between 10 and 100 square feet, limited PPE can be used. An air-purifying respirator is the most important piece of equipment for mold removal, but safety goggles are also necessary to protect the eyes from mold spores and other debris. For larger areas, full containment is required to limit the spread of mold throughout the building. This involves sealing all ventilation and air supply grilles, doors, and pipe ducts in the containment area with polyethylene sheeting.
In some cases, it may be necessary to remove the outer layer of a wall with extensive mold damage and work inward. In this situation, adequate containment is essential to ensure that mold does not spread throughout the building. It is important to remember that personal protective equipment is necessary when cleaning mold as it exposes you to potentially dangerous mold spores. Therefore, it is essential to wear the right PPE when dealing with mold in order to protect yourself from any potential health risks.